Cisco Systems OL-7396-01 Manual De Usuario

You can configure SNMP traps to be generated when the ATM accounting file reaches a specified 
threshold. You can use these traps to alert you when a file is full and needs to be downloaded.

To configure ATM accounting SNMP traps, use the following command in global configuration mode:

The following example shows how to configure ATM accounting SNMP traps to be sent when the file 
size reaches 85 percent full:

Switch(config)# atm accounting trap threshold 85

To display the ATM accounting trap threshold configuration, use the following EXEC command:

The following example shows the ATM accounting trap threshold configuration using the 
show atm accounting command:

Switch# show atm accounting

ATM Accounting Info:     AdminStatus - UP;      OperStatus : UP

Trap Threshold - 90 percent (4500000 bytes)

Interfaces:

File Entry 1: Name acctng_file1

    Descr: atm accounting data

    Min-age (seconds): 3600

    Failed_attempt : C0

    Sizes: Active 69 bytes (#records 0); Ready 73 bytes (#records 0)

selection Entry -

    Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1

    Selection entry 1, list - FF.FE.BF.FC

    Selection entry 1, connType - F0.00

Active selection -

    Selection entry 1, subtree - 1.3.6.1.4.1.9.10.18.1.1

    Selection entry 1, list - FF.FE.BF.FC

    Selection entry 1, connType - F0.00

<information deleted>

atm accounting trap threshold 
percent-value

Configures the ATM accounting file threshold 
to generate an SNMP trap when it reaches a 
percentage of the maximum size.

Displays the ATM accounting trap 
configuration.