Cisco Systems A9KMOD80TR Manual De Usuario
F I N A L D R A F T — C i s c o C o n f i d e n t i a l
5-8
Cisco ASR 9000 Series Aggregation Services Router Getting Started Guide
OL-17502-01
Chapter 5 CLI Tips, Techniques, and Shortcuts
Viewing System Information with show Commands
•
If the saved output is to be used as a configuration file, the filename should end with the
cfg
suffix
for easy identification. This suffix is not required, but can help locate target configuration files.
Example:
Example:
myconfig.cfg
In the following example, a target configuration file is saved to the default user directory:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# show configure | file disk0:myconfig.cfg
RP/0/RSP0/CPU0:router(config)# abort
RP/0/RSP0/CPU0:router#
Narrowing Output from Large Configurations
Viewing a large running configuration can produce thousands of lines of output. To limit the output of a
show command to only the items you want to view, use the procedures in the following sections:
show command to only the items you want to view, use the procedures in the following sections:
•
•
Limiting show Command Output to a Specific Feature or Interface
Entering keywords and arguments in the show command limits the show output to a specific feature or
interface.
interface.
In the following example, only information about the static IP route configuration appears:
RP/0/RSP1/CPU0:router# show running-config router static
router static
address-family ipv4 unicast
0.0.0.0/0 10.21.0.1
0.0.0.0/0 Gi0/1/0/1 10.21.0.1
!
!
In the following example, the configuration for a specific interface appears:
RP/0/RSP0/CPU0:router# show running-config interface Gi 0/1/0/1
interface Gi0/1/0/1
ipv4 address 10.21.54.31 255.255.0.0
!
Using Wildcards to Display All Instances of an Interface
To display the configuration for all instances, type the asterisk (*) wildcard character.
Note
See the
for more
information.
In the following example, a configuration for all Gigabit-Ethernet interfaces appears:
RP/0/RSP1/CPU0:router# show running-config interface gi *
interface Gi0/1/0/0
ipv4 address 10.2.3.4 255.255.255.0
gi