3com WL-575 Manual De Usuario
6-83
Using the Command Line Interface
Table 21 Filtering Commands
filter local-bridge
This command disables communication between wireless clients. Use the no form
to disable this filtering.
This command disables communication between wireless clients. Use the no form
to disable this filtering.
Syntax
filter local-bridge <all-VAP | intra-VAP>
no filter local-bridge
all-VAP - When enabled, clients cannot establish wireless communications
with any other client, either those associated to the same VAP interface or
any other VAP interface.
with any other client, either those associated to the same VAP interface or
any other VAP interface.
intra-VAP - When enabled, clients associated with a specific VAP
interface cannot establish wireless communications with each other.
Clients can communicate with clients associated to other VAP interfaces.
interface cannot establish wireless communications with each other.
Clients can communicate with clients associated to other VAP interfaces.
Command
Function
Mode
Page
filter local-bridge
Disables communication between wireless clients
GC
filter ap-manage
Prevents wireless clients from accessing the
management interface
management interface
GC
filter uplink enable
Ethernet port MAC address filtering
GC
filter uplink
Adds or deletes a MAC address from the filtering table GC
filter ethernet-type enable Checks the Ethernet type for all incoming and outgoing
Ethernet packets against the protocol filtering table
GC
filter ethernet-type
protocol
protocol
Sets a filter for a specific Ethernet type
GC
show filters
Shows the filter configuration
Exec