3com SuperStack 3 NBX Manual De Usuario
Configuring and Managing Analog Line Card Ports
187
If you remove a line card from the system, the port information remains in
the database. The extension numbers assigned to the four ports do not
become available for reuse unless you use the NBX NetSet utility to
remove the line card from the configuration database.
the database. The extension numbers assigned to the four ports do not
become available for reuse unless you use the NBX NetSet utility to
remove the line card from the configuration database.
This section covers these topics:
■
■
■
■
■
■
Configuring a
Line Card Port
When you configure a line card port, you can assign it as a member of a
line pool.
line pool.
You can configure a line card port automatically (recommended) or
manually.
manually.
Verify that you have chosen a 3-digit or 4-digit dial plan before you begin
to configure line card ports. See
to configure line card ports. See
Configuring a Line Card Port Automatically
To configure a line card port automatically:
1 Select NBX NetSet > System Configuration.
2 Click System-wide. The System Settings dialog box appears.
3 Enable the Auto Discover Line Cards check box.
4 Click OK.
Configuring a Line Card Port Manually
Most organizations use Auto Discovery to automatically configure line
card ports. However, you can configure a line card port manually and
select all settings.
card ports. However, you can configure a line card port manually and
select all settings.
To configure a line card port manually:
1 Select NBX NetSet > Device Configuration > Line Card Ports.
2 Click Add.