Avocent PM IPDU Manual De Usuario

14        Cyclades PM IPDU Installer/Administrator/User Guide

After a successful login, the PM IPDU command prompt appears after which you may use any of 
the commands described in this chapter.

NOTE: When a range of outlets is used in a command and the range spans more than one PM IPDU in a daisy 
chain, the range of outlets must not be specified by name. The range of outlets may only be specified by number 
in this situation.

The adduser command adds one username to the internal database. A maximum of eight characters 
(not case sensitive) is allowed, and a maximum of eight individual users is allowed. This command 
is available to the admin user only. 

adduser <user>

<user> 

username

To add a user, enter:

pm>adduser popper

The alarm command sets and reads the current threshold. This command is available to the admin 
user only. 

alarm | [<IPDU#>|<IPDU_ID>] | <threshold>

In the case of a PM42 IPDU:

alarm | <IPDU#> | <threshold> | <phase_letter>