Samsung ML-3560 Series Manual De Usuario

Using Print Materials

4.8

Load labels into the 

Multi-Purpose Tray

 with the print 

side up. Adjust the guide to fit the width of the labels. 

When you print, set the paper source, type, and size 
properly in the software application. For details, see the 
Software Section. 

For details about setting on the control panel, see 
page 3.2.

After printing, close the Multi-Purpose Tray and the rear 
cover.

Open the Multi-Purpose Tray and pull the extender.

Guidelines
• Only use transparencies recommended for use in laser 

printers.

• Ensure that transparencies are not wrinkled, curled, or have 

any torn edges.

• Hold the transparencies by the edges and avoid touching the 

print side. Oils from your fingers can cause print quality 
problems.

• Be careful not to scratch or leave fingerprints on the print 

side.

Open the rear cover and pull the extender.

Load transparencies in the 

Multi-Purpose Tray

 with the 

print side up, and the top with the adhesive strip 
entering the printer first. Adjust the guide to fit the 
width of the transparencies. 

When you print, set the paper source, type, and size 
properly in the software application. For details, see the 
Software Section. 

For details about setting on the control panel, see 
page 3.2.

After printing, close the Multi-Purpose Tray and the rear 
cover.

:

• If you print on thin transparencies to the rear cover, they can 

be curled. In this case, use the output tray. If the problem 

persists, check if your transparencies meets the printer’s 

specifications.

• To prevent transparencies from sticking, do not let the 

printed sheets stack up as they are printed out.

• Place transparencies on a flat surface after removing them 

from the printer.