Samsung CLP-325W Manual De Usuario

Wireless network setup (CLP-325W(K)/CLP-326W only)_ 46

and Signal is Printer Self Network.
Then, click on Next.
If you want to use other ad-hoc settings, select another wireless 

network from the list. 

If you want to change ad-hoc settings click the Advanced 
Setting

 button. 

•

Enter the SSID name 

you want (SSID is case-sensitive).

•

Select Ad-hoc.

•

Select the channel (Auto Setting or 2412 MHz to 

2467 MHz).

•

Select an authentication type.

Authentication is not used, and encryption 

may or may not be used, depending on the need for data 

security.
Shared Key: 

Authentication is used. A device that has a 

proper WEP key can access the network.

•

Select the encryption (None, WEP64, WEP128).

•

Enter the encryption network key value.

•

Confirm the encryption network key 

value.

•

If you are using the WEP Encryption, select 

the appropriate WEP Key Index.

The wireless network security window appears when the 

ad-hoc network has security setting.
The wireless network security window appears. Select Open 
System

 or Shared Key for the authentication and click on 

.

•

WEP (Wired Equivalent Privacy) is a security protocol 

preventing unauthorized access to your wireless network. 

WEP encrypts the data portion of each packet exchanged 

on a wireless network using a 64-bit or 128-bit WEP 

encryption key.

The window showing the wireless network setting appears. Check 

the settings and click on Next.

Before entering the IP address for the machine, you must know 
the computer’s network configuration information. If the 

computer’s network configuration is set to DHCP, the wireless 

network setting should also be DHCP. Likewise, if the 

computer’s network configuration is set to Static, the wireless 

network setting should also be Static.
If your computer is set to DHCP and you want to use Static 

wireless network setting, you must contact the network 

administrator to get the static IP address.

•

If the IP address assignment method is DHCP, check if 

DHCP is shown in the Wireless Network Setting Confirm 

window. However, if it shows Static, click on Change 
TCP/IP

 to change the assignment method to Receive IP 

.

•

If the IP address assignment method is Static, check if 

Static is shown in the Wireless Network Setting Confirm 

window. However, if it shows DHCP, click on Change 
TCP/IP

 to enter the IP address and other network 

configuration values for the machine.
For example:

If computer’s network information is as shown below:

-

IP address: 169.254.133.42

-

Subnet Mask: 255.255.0.0

Then, the machine’s network information should be as 

below:

-

IP address: 169.254.133. 43

-

Subnet Mask: 255.255.0.0 (Use the computer’s subnet 

mask.)

-

Gateway: 169.254.133.1

The wireless network connects according to the network 

configuration.

When the wireless network setting is completed, disconnect the USB 

cable between the computer and machine. 

Follow the instructions on the screen to complete the installation. 

After the installation is finished, click on Quit or Restart.

Your machine is a network compatible machine. To enable your machine to 

work with your network you will need to perform some configuration 

procedures.

•

After compleleting the wireless network connection, you need to 

install a machine driver to print from an application (See "Installing 

•

See your network administrator, or the person that set up your 

wireless network, for information about your network configuration.

Ensure you have following items ready:

•

Access point

•

Network-connected computer

•

Software CD that was provided with your machine

•

The machine installed with a wireless network interface

•

Network cable

Firstly, you have to set up an IP address for network printing and 

managements. In most cases a new IP address will be automatically 

assigned by a DHCP (Dynamic Host Configuration Protocol) server 

located on the network.
In a few situations the IP address must be set manually. This is called a 

static IP and is often required in corporate intranets for security reasons.

•

: Connect your machine to the network, and wait 

a few minutes for the DHCP server to assign an IP address to the 

machine. Then, print the Network Configuration Report as 

explained above. If the report shows that the IP address has 

changed, the assignment was successful. You will see the new IP 

address in the report.

•

: Use SetIP program to change the IP address 

from your computer.

In an office environment, we recommend that you contact a network 

administrator to set this address for you.

You can identify the network settings of your machine by printing a 

network configuration report.
To print the report:

In ready mode, press and hold the Cancel (

) button for about 5 

seconds. You can find your machine’s MAC address and IP address.