Manualsbrain.com
  1. Manuales
  2. Marcas
  3. Samsung
  4. CLP-325W
  5. Manual De Usuario

Samsung CLP-325W Manual De Usuario

Descargar
Página de 103
Wireless network setup (CLP-325W(K)/CLP-326W only)_ 47
For example:
•
MAC Address: 00:15:99:41:A2:78
•
IP Address: 192.0.0.192
IP setting using SetIP Program (Windows)
This program is for manually setting the network IP address of your 
machine using its MAC address to communicate with the machine. A 
MAC address is the hardware serial number of the network interface and 
can be found in the Network Configuration Report.
For using the SetIP program, disable the computer firewall before 
continuing by performing the following:
1.
Open Start > All programs > Control Panel.
2.
Double click on Security Center.
3.
Click on Windows Firewall.
4.
Disable the firewall.
Installing the program
1.
Insert the Printer Software CD-ROM provided with your machine. 
When the driver CD runs automatically, close that window.
2.
Start Windows Explorer and open the X drive. (X represents your 
CD-ROM drive.)
3.
Double-click Application > SetIP.
4.
Double-click Setup.exe to install this program.
5.
Select a language, then click on Next.
6.
Follow the instructions in the window and complete the installation.
Starting the program
1.
Connect your machine to the network with a network cable.
2.
Turn on the machine.
3.
From the Windows Start menu, select All Programs > Samsung 
Printers
 > SetIP > SetIP.
4.
Click on the   icon (third from left) in the SetIP window to open the 
TCP/IP configuration window.
5.
Enter the machine’s new information into the configuration window as 
follows. In a corporate intranet, you may need to have this 
information assigned by a network manager before proceeding.
•
MAC Address
: Find the machine’s MAC address from the Network 
Configuration Report
 and enter it without the colons. For 
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•
IP Address
: Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150, 
enter 192.168.1.X. (X is number between 1 and 254 other than 
the computer’s address.)
•
Subnet Mask
: Enter the subnet mask.
•
Default Gateway
: Enter the default gateway.
6.
Click on Apply, and then click on OK. The machine will automatically 
print the Network Configuration Report. Confirm that all the 
settings are correct.
7.
Click on Exit to close the SetIP program.
8.
If necessary, restart the computer’s firewall.
IP setting using SetIP Program (Macintosh)
For using the SetIP program, disable the computer firewall before 
continuing by performing the following:
 
The path and UIs may differ by Mac OS version. Refer to the Mac 
OS manual.
1.
Open System Preferences.
2.
Click on Security.
3.
Click on the Firewall menu.
4.
Turn the firewall off.
 
The following instructions may vary for your model.
1.
Connect your machine to the network with a network cable.
2.
Insert the Installation CD-ROM, and open the disk window, select 
MAC_Installer
 > MAC_Printer > SetIP > SetIPApplet.html.
3.
Double click the file and Safari will automatically open, then select 
Trust
. The browser will open the SetIPApplet.html page that shows 
the printer’s name and IP address information. 
4.
Click on the   icon (third from left) in the SetIP window to open the 
TCP/IP configuration window.
5.
Enter the machine’s new information into the configuration window as 
follows. In a corporate intranet, you may need to have this 
information assigned by a network manager before proceeding.
•
MAC Address
: Find the machine’s MAC address from the Network 
Configuration Report
 and enter it without the colons. For 
example, 00:15:99:29:51:A8 becomes 0015992951A8.
•
IP Address
: Enter a new IP address for your printer.
For example, if your computer’s IP address is 192.168.1.150, 
enter 192.168.1.X. (X is number between 1 and 254 other than 
the computer’s address.)
•
Subnet Mask
: Enter the subnet mask.
•
Default Gateway
: Enter the default gateway.
6.
Select Apply, then OK, and OK again. The printer will automatically 
print the configuration report. Confirm that all the settings are correct. 
Quit Safari
. You may close and eject the installation CD-ROM. If 
necessary, restart the computer’s firewall. You have successfully 
changed the IP address, subnet mask, and gateway.
Configuring the machine’s wireless network
Before starting you will need to know the network name(SSID) of your 
wireless network and the network key if it is encrypted. This information 
was set when the access point (or wireless router) was installed. If you 
do not know about your wireless environment, please ask the person 
who has set up your network.
To configure wireless parameters, you can use SyncThru™ Web 
Service
.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable 
connection status.