Samsung CLP-325W Manual De Usuario

Wireless network setup (CLP-325W(K)/CLP-326W only)_ 48

Check whether or not the network cable is connected to the machine. 

If not, connect the machine with a standard network cable.

Start a web browser such as Internet Explorer, Safari or Firefox and 

enter your machine’s new IP address in the browser window.
For example,

Click on Login on the upper right of the SyncThru™ Web Service 

website.
A log-in page appears. 

Type in the ID and Password then click on Login.

If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

 

•

 

When the SyncThru™ Web Service window opens, click on Network 

.

Click on Wireless > Wizard.

 will help you setup the wireless network configuration. 

However, if you want to set the wireless network directly, select 
Custom

.

Select the one Network Name(SSID) in the list.

•

: SSID (Service Set Identifier) is a name that identifies a 

wireless network, access points, and wireless devices attempting 

to connect to a specific wireless network must use the same 

SSID. The SSID is case-sensitive.

•

: Operation Mode refers to the type of wireless 

connections (See "Wireless network name and network key" on 

-

: Allows wireless devices to communicate directly with 

each other in a peer-to-peer environment.

-

: Allows wireless devices to communicate with 

each other through an access point.

If your network’s Operation Mode is Infrastructure, select the 

SSID of the access point. If the Operation Mode is Ad-hoc, 

select the machine’s SSID. Note that “portthru” is the default 

SSID of your machine.

Click on Next.

If the wireless security setting window appears, enter the registered 

password (network key) and click on Next.

The confirmation window appears, please check your wireless setup. 

If the setup is right, click on Apply.

Disconnect the network cable (standard or network). Your 

machine should then start communicating wirelessly with the 

network. In case of Ad-hoc mode, you can use a wireless LAN 

and wired LAN simultaneously.

After you have installed your Samsung wireless network printer, print 

another copy of the Network Configuration Report and keep it for future 

reference. You are now ready to use your new Samsung wireless printer on 

your network. 

If the wireless network seems to not be working, set all the network 

setting to the factory defaults and try again (See "Restoring factory 

default settings using SyncThru™ Web Service" on page 36).

You can turn the Wi-Fi network on/off with SyncThru™ Web Service. The 

factory default is on.
To turn default mode, follow the following steps:
1.

Check whether the network cable is connected to the machine. If not, 

connect the machine with a standard network cable.

Start a web browser such as Internet Explorer, Safari or Firefox and 

enter your machine’s new IP address in the browser window.
For example,

Click on Login on the upper right of the SyncThru™ Web Service 

website.
A log-in page appears. 

Type in the ID and Password then click on Login.
If it’s your first time logging into SyncThru™ Web Service, type in the 

below default ID and password.

•

 

•

 

When the SyncThru™ Web Service window opens, click on Network 
Settings

.

Click on Wireless > Custom.
You can also turn the Wi-Fi network on/off.

•

Your machine may not be turned on. Turn on your computer and the 

machine.

•

USB cable is not connected between your computer and machine. 

Connect machine to your computer using the USB cable.

•

The machine does not support a wireless network. Check the 

machine's user's guide included on the software CD supplied with 

your machine and prepare a wireless network machine.

•

The machine is unable to search the network name (SSID) you have 

selected or entered. Check the network name (SSID) on your access 

point and try connecting again. 

•

Your access point is not turned on. Turn on your access point.

•

You configured security incorrectly. Check the configured security on 

your access point and machine.

•

Your computer is not receiving a signal from your machine. Check the 

USB cable and your machine’s power.

•

Your machine is connected with a wired network cable. Remove the 

wired network cable from your machine.