GarrettCom 6K16V Manual De Usuario

Magnum 6K16V Managed Fiber Switch         Installation and User Guide (06/04)

 

 

All Magnum Ethernet products are designed to provide reliability and 

consistently high performance in all network environments.  The installation of a 

Magnum 6K16V Switch is a straightforward procedure (see  INSTALLATION, Section 

2.6);  the operation is also straightforward and is discussed in Section 4. 

 

Should problems develop during installation or operation, this section is 

intended to help locate, identify and correct these types of problems.  Please follow the 

suggestions listed below prior to contacting your supplier.  However, if you are unsure of 

the procedures described in this section or if the Magnum 6K16V Switch is not 

performing as expected, do not attempt to repair the unit; instead contact your supplier 

for assistance or contact GarrettCom Customer Support. 

1. 

If difficulty is encountered when installing or operating the unit, refer back to 

 

the Installation Section of the applicable chapter of this manual.  Also check 

 

to make sure that the various components of the network are interoperable. 

2. 

Check the cables and connectors to ensure that they have been properly 

connected and the cables/wires have not been crimped or in some way 

impaired during installation.  (About 90% of network downtime can be 

attributed to wiring and connector problems.) 

3. 

Make sure that an AC power cord is properly attached to each Magnum 6K16V 

Switch unit.  Be certain that each AC power cord is plugged into a functioning 

electrical outlet.  Use the PWR LEDs to verify each unit is receiving power. 

4. 

If the problem is isolated to a network device other than the Magnum 6K16V 

Switch product, it is recommended that the problem device be replaced with a 

known good device.  Verify whether or not the problem is corrected.  If not, go 

to Step 5 below.  If the problem is corrected, the Magnum 6K16V Switch and 

its associated cables are functioning properly. 

5. 

If the problem continues after completing Step 4 above, contact your supplier 

of the Magnum 6K16V Switch unit or if unknown, contact GarrettCom, Inc.by 

fax, phone or email (support@garrettcom.com) for assistance. 

 

48

.

.