GarrettCom DS60s Manual De Usuario

Magnum DS50 / DS60s Dual Speed Hubs                  Installation and User Guide (06/02)

 

DS60s are “plug and play” units enclosed in a lightweight, compact, rugged metal enclosure 

suitable for office, lab and industrial sites. The DS50 / DS60s are available for horizontal or 

vertical mounting (see Section 3.1). 

 
2.2.1 

The Magnum DS60F chassis houses one main board equipped with five 

hub ports and a switched fiber port. The switched fiber port is available with an SC connector 

and options of multi-mode, 

single-mode and long reach. It 

has an internal power supply and 

a small cooling fan in the bottom, 

extending ambient operation to 

55C. The port side of the chassis 

consists of five shared 10/100Mb 

RJ-45 ports and one 100Mb 

switched SC fiber port. There is 

an up-link (UPLINK) switch next 

to Port 1, which allows this port 

to be used for cascading to a hub 

or switch. There is a manual switch “F-H” underneath the switched port #6 which provides 

“Full-duplex” and “Half-duplex” capability to the switched port 

     The Magnum DS60F has power (PWR) and collision (COL) LED’s and 10 and 

100 LEDs for the unit.  It also has link (LINK) and receive (RX) activity LEDs for each of the 

five shared ports and for Port 6. The port #6 has a Full-duplex (FDX) and a speed (100) LED 

also. Rubber feet on the bottom provide a sturdy grip and clearance for the exhaust of the 

cooling fan.                                         

 

The internal power supply is an auto ranging AC power supply for input of 115-230 

vac, 50/60 Hz. Optionally available are 24VDC and -48VDC for the industrial  and telecom 

markets. The recessed male IEC power connector is located at the right-rear. Two mounting 

brackets for optional wall mounting are supplied with each unit. An optional “edge- stand” is 

available (See “Spare Parts Price List”) and is used for floor-mounting on carpeted surfaces. 

7 

.

.