GarrettCom DS60s Manual De Usuario

Magnum DS50 / DS60s Dual Speed Hubs                  Installation and User Guide (06/02)

 

10 

.

.

 

The Magnum DS50 has a power (PWR) and collision  (COL) LED’s  and 

10 and 100 LED’s for the unit.  It also has link (LINK) and receive (RX) activity LED’s for 

each of the five shared ports. Rubber feet on the bottom provide a sturdy grip and clearance for 

the exhaust of the cooling fan.                                         

 

The internal power supply is an auto ranging AC power input of 115-230 vac, 50/60 

Hz.  The recessed male IEC power connector is located at the right-rear. Two mounting 

brackets for optional wall mounting are supplied with each unit. An optional “edge- stand” is 

available (See “Spare Parts Price List”) and is used for floor-mounting on carpeted surfaces. 

The Magnum 

DS50 / DS60 Dual-speed 

Hubs has Ports 1-5 as shared 

10Mb / 100Mb ports. Each 

port has its own Link LED 

and an RX (receive) activity 

LED to indicate its status. 

These LED’s are built into 

the RJ-45 connector. The 

Link LED will be on when proper cable connection is made on both ends and the RX LED will 

flash to indicate activity when the port is receiving data.  

COL

PWR

1

2

3

4

5

10/100 Mb/s

 

COL

PWR

1

2

3

4

5

10/100 Mb/s

 

The up-link switch for Port 1 is located on the left side and enables port 1 to either 

connect to a user station or to cascade with another hub or switch. See section 4.4 for more 

details about up-link.  

The first five ports, # 1-5 RJ-45 twisted pair ports, support auto-sensing for speed and 

independent of the other ports.  Speed-sensing is performed by the DS50 / DS60 electronics in 

accordance with the standards of the IEEE 802.3u auto-negotiation standard.  If the connected