GarrettCom 6K32T Manual De Usuario

Descargar
Página de 78
Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 
 
 
15
 
 
www  GarrettCom  com
.
.
On the model 6K8-RJ45 module, there are four LEDs for each port, two in the 
connector and two separate.  The LK (Link) LED indicates “ready for operation” on that 
port when lit. The blinking ACT (Activity) LED indicates receiving Activity on that port 
when lit. The 10/100 LED indicates operation at 100Mb speed when ON and at 10 Mb 
speed when OFF (when auto-
negotiation is not disabled). 
The FDX/HDX LED is ON to 
indicate full-duplex operation 
and OFF to indicate half-
duplex mode. A twisted pair 
cable must be connected into 
an RJ-45 port and the Link (LK) indicator for that port must be ON (indicating there is a 
powered-up device at the other end of the cable) in order for a LK LED to provide valid 
indications of operating conditions on that port.  
Using the 6K8-Series (MNS-6K) management software, the user may disable 
auto-negotiation and fix the desired operation of each RJ-45 port. User may select 10Mb 
or 100Mb speed and full- or half-duplex mode per-port as per user requirement. (See 
Magnum MNS-6K Software Manual for details info.). 
 
2.2.3a 
New PoE(Power Inside), model PI6KP8-45RJ (MDIX), 8-port 10/100Mb 
 
The New PoE RJ-45 
ports act similar to 
regular RJ-45 ports, 
except they have 
capability of providing 
power on each port to 
power up the PD 
devices, per the 
IEEE802.3af PoE 
standard. Only  4 x RJ-
45 (10/100) ports 
maxm. support POE(Power Inside) option in one rack mounted 6K-unit. The power 
inside PoE option is factory configured and equipped with the necesasary power option 
to support four 802.3af PoE pd devices. The 4-RJ45 POE module are also available with 
mix –n-match with fiber modules. Please check the ordering information  Sec.1.2. for all 
the various PI6K PoE modules option. 
The LEDs on 6KP8-RJ45- PoE module are slightly different compared to 
regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the 
1                    3                   5                 7
10/100
LK
F/H
ACT
10/100
LK
        2                   4                      6                  8
F/ H
ACT
 
PI6KP8V-45RJ
8 Port@ 10/100Mb POE Copper ports
4
4
FULL/HALF
1
PoE
LK/ACT
2
3
10/100
2
1                    3                   5                 
7
10/10
0
LK/ACT
1
3
F/H
PO
E
10/10
0
LK/ACT
2                   4            
6                  
8
F/ 
H
PO
E
PI6KP8V-45RJ
8 Port@ 10/100Mb POE Copper ports
4
4
FULL/HALF
1
PoE
LK/ACT
2
3
10/100
2
1                    3                   5                 
7
10/10
0
LK/ACT
1
3
F/H
PO
E
10/10
0
LK/ACT
2                   4            
6                  
8
F/ 
H
PO
E