GarrettCom 6K32T Manual De Usuario

Magnum 6K32T & 6K32TRC Managed Switch          Installation and User Guide 05/07) 

 
 

16

 

 

.

.

PoE LED is ON when connected properly to a 803.af compliant PD device on that port. 
When non-PoE devices are connected, the PoE LED is OFF. Operation of Ethernet data 
traffic is not affected by PoE. 

LINK and ACTIVITY LEDS are combined on the PoE modules into one LED 

that is marked as LINK/ACT, as shown in the diagram. 

 

2.2.3b    New PoE(Power Pass-through), model P6KP8-RJ45 (MDIX), 10/100Mb 8-
port 
 

The PoE (Power-pass-through) RJ-45 ports act similar to regular RJ-45 ports, 

except they have capability of providing power on each port to power up the PD devices, 
per the IEEE802.3af PoE standard. The Power Pass-through PoE modules are totally 
dependent upon the powerful  -48VDC input power supply  to support more  RJ-45 
(10/100) ports. Each port requires atleast 15watts to power up the PoE PD devices. 
Maxm. one PoE modules  can be configured in the A, B or C slot of any 6K s with -
48vdc power input. The PoE modules are also available with mix –n-match with fiber 
modules. Please check the ordering information Sec.1.2 for all the various P6K PoE 
modules option. 
 

The LEDs 

on 6KP8-RJ45- PoE 
module are slightly 
different compared 
to regular (non-PoE) 
RJ-45 modules as 
shown in Fig 2. 
When the PoE port 
is in use, the PoE 
LED is ON when 
connected properly to a 803.af compliant PD device on that port. When non-PoE devices 
are connected, the PoE LED is OFF. Operation of Ethernet data traffic is not affected by 
PoE. 

LINK and ACTIVITY LEDS are combined on the PoE modules into one LED 

that is marked as LINK/ACT, as shown in the diagram. 

The combo six-port modules are combinations of copper and fiber media, available as 

four 10/100 switched RJ-45 copper ports and two 100Mb switched multi-mode fiber ST, 

TX       LK     RX

TX       LK     RX