Black Box KV162A Manual De Usuario

If the main menu serial-port function is enabled (you can check this by selecting option 10), you can use
option 3 to transfer firmware from the local Management Card to any other ServSwitch Multi Card in your
system that you can transmit to. When you select this option, the local Management Card checks the firmware
programs it has loaded in its memory, then displays descriptions of them on screen (see the last paragraph on
the previous page for what each column means).

Download local to Remote Flash ROM

Validating flash rom files...

FLASH

Pos Flash Type FW Rev

--- ---------- ------

1  XPIQ       -NA-

2  Available

3  Available

4  Available

5  Available

6  Available

7  Available

8  Available

9  Available

The Card then prompts you for the numbered slot in its Flash memory where the program you want to transfer
is stored (the program in position 1 can’t be transferred to any other Card):

Local Flash ROM number (2..9) [2]:

Then the Card prompts you for the address of the Card that will be receiving the firmware program:

Channel address [0-H]:

Finally you’re prompted for the number of the slot in the other Card’s memory where you want that Card to
store the program (“1” is the only valid option for any type of Card other than Management Cards):

Remote Flash ROM (1..7) [1]:

Type in the number of your desired slot or press [Enter] to accept the default value. As soon as you do so—
provided the addresses and the file are all valid—the transfer begins. Depending on whether the transfer
succeeds or not, one of these messages will be displayed:

Flash ROM download was SUCCESSFUL

Flash ROM download FAILED