GenTran 5.1 Manual De Usuario

Resending Interchanges

Using Interchanges

Gentran:Server for Windows – November 2005

Gentran:Server for Windows User’s Guide

7 - 18

There are two ways to resend interchanges:

◗

To automatically resend all outbound interchanges, you can set the Send 
Options preference.

◗

To resend specific outbound interchanges, you can use the Resend command 
from the Interchanges browser.

Note
You can only resend interchanges that were previously sent or that have a status of 
Ready to send.

You can set an option for the system to automatically check for interchanges that 
are stuck in the Send Queue. The interval for checking the Send Queue is set by 
default to 30 minutes in the Registry. However, you can change this value in the 
UPIDValidationInterval key.

During the first system check, the Gentran Executive Service checks for 
interchanges that are possibly stuck and places those interchanges into a queue. 
During the next system check, the Executive Service checks if those interchanges 
are still in the queue. Any that are still in the queue at the second system check are 
flagged to be sent during the next communications session.

To automatically resend outbound interchanges, complete the following steps: 

1

From the Options menu, select Preferences.

System response
The system displays the Preferences dialog box.

2

Click the Send Options tab.

3

Click the box for Check for interchanges that did not send.

4

Click OK.

5

Optional
Change the System Check Interval in the registry. (Default is 30 
minutes.)

6

Restart services.