Cisco Systems ASA 5585-X Manual De Usuario
20-11
Cisco ASA Series Firewall CLI Configuration Guide
Chapter 20 Configuring Cisco Intercompany Media Engine Proxy
Configuring Cisco Intercompany Media Engine Proxy
Note
through
apply to both basic (in-line) and off path deployments and
applies only to
off path deployment.
To configure a Cisco Intercompany Media Engine for a basic deployment, perform the following tasks.
Step 1
Configure static NAT for Cisco UCM. See
Or
Configure PAT for the UCM server. See
Step 2
Create ACLs for Cisco Intercompany Media Engine Proxy. See
.
Step 3
Create the media termination address instance for Cisco Intercompany Media Engine Proxy. See
.
Step 4
Create the Cisco Intercompany Media Engine Proxy. See
.
Step 5
Create trustpoints and generate certificates for the Cisco Intercompany Media Engine Proxy. See
Step 6
Create the TLS proxy. See
.
Step 7
Configure SIP inspection for the Cisco Intercompany Media Engine Proxy. See
.
Step 8
(Optional) Configure TLS within the enterprise. See
Step 9
(Optional) Configure off path signaling. See
.
Note
You only perform
when you are configuring the Cisco Intercompany Media Engine Proxy
in an off path deployment.
Configuring NAT for Cisco Intercompany Media Engine Proxy
To configure auto NAT, you first configure an object; then use the nat command in the object
configuration mode.
configuration mode.
The example command lines in this task are based on a basic (in-line) deployment. See
for an illustration explaining the example command lines in this task.
Alternatively, you can configure PAT for the Cisco Intercompany Media Engine Proxy. See