Polycom 2000/4000 Manual De Usuario

Chapter 2-Additional Conferencing Information

•

Create a cascade-enabled Entry Queue for dial-in connections (you 

create it once for all cascading links using the same line rate).

•

Create the Master and Slave conferences, defining the appropriate 

line rate and whether it is a CP conference or HD Video Switching 

conference.

•

Create a cascade-enabled Dial-out Participant link in the Master or the 

Slave conference (depending on the dialing direction).

Establish the Master-Slave relationships and the dialing direction
MIH Cascading conferences are linked in a master-slave relationship with 

each other according to the dialing direction. It determines the definition 

of the cascaded links and the Entry Queues. Dialing directions can be top-

down or bottom-up or up from level 4 to level 3 and from level 3 to level 2 
and down from level 1 to level 2. 

 

It is recommended to select one dialing direction (usually bottom up) for the 
entire hierarchy to simplify the setup procedure.

RMX 2000 
Level 1 
to 
RMX 2000 
Level 2

Define the cascade-enabled 
Entry Queue, defining it as 
Slave.

Define the conference line 
rate and if required to HD 
Video Switching to be the 
same as the one set on the 
RMX 2000 Level 2.

Define the conference line 
rate and if required to HD 
Video Switching to be the 
same as the one set on the 
RMX 2000 Level 1.

Define the dial-out participant 
(Cascaded Link) to the 
conference running on the 
RMX 2000 on Level 2, 
setting it as Master.