Echo HCA-265 Manual De Usuario

Never adjust cutting assembly with engine running.  

Hedge clipper blades are sharp.  Always wear gloves when adjust-

ing cutting assembly.  

DO NOT stand hedge clipper on end when adjusting cutting angle, 

otherwise serious injury may result

1.  Place unit on a flat clear area.  Assure stop switch is in the “STOP” 

position.  

2.  Pull out indexing ring (A), and turn ¼  turn to lockout position.  

3.  Turn hedge clipper ¼ turn so that indexing ring faces downward. 

4.  Release hand-guard blade lock (B) with right hand, while holding 

blade-adjustment handle (C) with left hand. 

5.  Rotate blades to desired cutting position.  

6.  Turn indexing ring ¼ turn to lock blade in place.

Gear case assembly becomes HOT during use.  Always grip assem-

bly at blade-adjustment handle when making cutting angle adjust-

ments, otherwise serious injury may result.