Echo HCA-265 Manual De Usuario

Always use the unit from the right-hand side of your body – NEVER 

from the left side.  Rotate cutter assembly 180 degrees on driveshaft in 

order to avoid cutting directly above your head, and to avoid contact 

with hot muffler.  

1.  Loosen gearcase clamping screw (A), hand guard clamping screw 

(B), and remove gearcase locating screw (C). 

2.  Rotate cutter assembly 180-degrees on driveshaft until locating 

hole in driveshaft is visible through locating hole in gearcase. 

3.  Install gearcase locating screw (C), and securely tighten all hard-

ware. 

Hedge Clipper blades are very sharp. Wear gloves to protect hands 

when rotating cutter assembly or serious personal injury may 

result.

During operation, the complete unit, especially the drive shaft 

housing and gearcase may become too hot to touch. Avoid contact 

when rotating cutter assembly.

The blade cover is used for transportation and storage. Remove 

blade cover before using the unit.

The attachment will operate immediately when the engine starts 

and could result in loss of control and possible serious injury. Keep 

movable parts of the attachment off the ground and away from 

objects that could become entangled or thrown.

1.  Stop Switch

Move stop switch button (A) forward away from the STOP  

 

position.

2.  Close Choke
 

Move choke lever (B) to Cold Start (

) Position.