Echo HCA-265 Manual De Usuario

3.  Purge Bulb

 

Pump purge bulb (C) until fuel is visible and flows freely in the 

clear fuel tank return line. Pump bulb an additional 4 or 5 times.

4.  Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear 

of all obstacles. Firmly grasp right hand grip and throttle trigger 

lockout with left hand and fully depress throttle trigger to wide 

open position. Rapidly pull recoil starter handle/rope (D) until 

engine fires (or maximum five [5] pulls).

5.  Choke

 

After engine fires (or five [5] pulls), move choke lever back to 

“Run” ( ) position. Hold throttle trigger and throttle trigger lock-

out fully depressed and pull recoil starter handle/rope until engine 

starts and runs. Release throttle trigger and allow unit to warm up 

at idle for several minutes.

If engine does not start with choke in Run position after 5 pulls, 

repeat instructions 2 - 5.

6.    Throttle Trigger

    After engine warm up, gradually depress throttle trigger to increase 

engine RPM to operating speed.

The starting procedure is the same as Cold Start except DO NOT close 

the choke, and do not depress throttle trigger to wide open position.

The attachment should not move at idle, otherwise serious per-

sonal injury may result.

If attachment moves, readjust carburetor according to “Carburetor 

Adjustment” instructions in this manual or see your ECHO Dealer.

1.  Stop Switch   

 

 

 

 

 

Move stop switch button  (A) away from the STOP position.

2.  Purge Bulb

 

Pump purge bulb (C) until fuel is visible and flows freely in the 

“Clear” fuel return line. Pump bulb an addition 4 or 5 times.

3.  Recoil Starter

 

Lay the unit on a flat area and keep movable attachment parts clear 

of all obstacles. Rapidly pull recoil starter handle/rope (D) until 

engine fires.

If engine does not start after 5 pulls, use Cold Start Procedure.