Bunn Dual TF DBC Manual De Usuario

Page 23

REVIEW RECIPES/MODIFY RECIPES/SET UP NO 
NAME COFFEE FLAVORS:
 

This function has three parts. It allows the operator 

to view the brew settings for the various coffee names 
programmed into the brewer.
 

It also allows the operator to modify (change) any of 

the BREW VOLUMES, BYPASS PERCENTAGES, PULSE 
BREW TIMES, PRE-INFUSION TIMES and DRIP-OUT 
TIMES for a particular coffee name programmed into 
the brewer.
 

Finally, this function is used to set up the two NO 

NAME coffee BREW VOLUMES, BYPASS PERCENT-
AGES, PULSE BREW TIMES and DRIP-OUT TIMES.

Procedure for reviewing recipes:
1.  Press and hold the upper right hidden switch ® 

until the display reads UNITS. Release the switch, 
then press and release switch until the display 
reads REVIEW RECIPES.

P2360

2. Press YES to proceed. The display should now 

read NO-NAME LEFT, along with MODIFY, SHOW 
and NEXT.

3.  Press and release SHOW. The screen will scroll 

through all the brew settings for that particular 
coffee fl avor name. When fi nished, the display 
will return to the coffee name just viewed.

4.  To see settings again, press SHOW. To advance 

to the next coffee fl avor name, press NEXT. 

5. To 

exit, 

press 

NEXT until the display reads THAT 

6.  After 5 seconds, the display will return to the 

REVIEW RECIPES screen. Press and release NO 
to advance to the next function screen, or press 
and release either ON/OFF switch located on the 
front switch panel to exit the programming mode 
and return to the MAIN SCREEN.

REVIEW RECIPES?

NO                    YES

<RECIPE NAME>

MODIFYSHOWNEXT

THAT WAS THE

LAST RECIPE

NO-NAME LEFT

MODIFYSHOWNEXT

EXIT TO

NEXT FUNCTION

SCREEN

SCROLLS THROUGH ALL

BREW SETTINGS FOR

COFFEE NAME

SCROLLS THROUGH ALL

BREW SETTINGS FOR ANY

OTHER COFFEE NAMES

STORED IN BREWER'S MEMORY

SCROLLS THROUGH ALL

BREW SETTINGS FOR ALL

COFFEE NAMES IN MEMORY

WHEN IT REACHES LAST

RECIPE IT WILL ADVANCE TO:

35058.1 071205