Bunn Dual TF DBC Manual De Usuario

Page 25

% BYPASS
 

This function allows adjustment of the amount of 

water that bypasses the grounds. The number signi-
fi es the percentage of the brew volume which does 
not fl ow over the coffee grounds.

NOTE: If the brewer is already in the % BYPASS screen, 
it is not necessary to follow steps 1 through 6 in this 
section, but proceed directly to step 7.

1.  Press and hold upper right hidden switch until 

the display reads UNITS. Release the switch, then 
press and release switch until the display reads 
REVIEW RECIPES.

2. Press YES to proceed. The display should now 

read NO-NAME LEFT, along with MODIFY, SHOW 
and NEXT.

3. Press 

and 

release 

NEXT to advance to the desired 

coffee name to be modifi ed.

P2292

4.  Press and release MODIFY.  The display should 

read BREW OZ. 

5. Press 

and 

release 

DONE. The display should read 

3 BATCHES DONE?.

6.  Press and release YES. The display should now 

read % BYPASS, and a batch light will be blinking. 
Press and release the batch size to be modifi ed.

7. Using 

(-) and (+) set the amount of bypass water 

(percentage) to be dispensed around the grounds 
for that particular batch size.

8. When 

fi nished, press another batch size and repeat 

step 7 for each batch to be modifi ed.

9.    When fi nished setting all batch sizes, press DONE. 

The display should read 3 BATCHES DONE? 

10. If they are not correct, press and release NO to 

return to the % BYPASS setup screen.

11.  If the 3 batch sizes are correct, press YES. This will 

advance to SET PULSE BREW. Another alternative 
is to press either ON/OFF switch located on the 
front switch panel to exit the % BYPASS setup 
and return to the MAIN SCREEN.