Bunn Dual TF DBC Manual De Usuario

Page 24

BREW OZ (SETTING OR ADJUSTING BREW VOL-
UMES) 
 

This function allows adjustment of the brew vol-

umes for each batch. The indicator signifi es volume 
in ounces per batch.

Procedure for modifying recipes - brew ounces: 
Range: 10.0 oz to 400 oz for all three batch sizes
1.  Press and hold the upper right hidden switch ® 

until the display reads UNITS. Release the switch, 
then press and release switch until the display 
reads REVIEW RECIPES.

2. Press YES to proceed. The display should now 

read NO-NAME LEFT, along with MODIFY, SHOW 
and NEXT.

3.  Press and release NEXT to advance to the desired 

coffee name to be modifi ed.

4.  Press and release MODIFY.  The display should 

read BREW OZ: and a batch light will be blinking. 

P2291

Press and release the batch size to be modifi ed.

5. Using (-) and (+), set the amount of brew water, 

in ounces, to be dispensed over the grounds for 
that particular batch size.

6. When 

fi nished, press another batch size and repeat 

step 5 for that size for each batch size to be modi-
fi ed. Continue setting all batch sizes.

7.  When fi nished setting all batch sizes, press and 

release DONE.  The display should read 3 BATCH 
SIZES DONE?

8.   If the three batch sizes are not correct, press and 

release NO to return to the BREW OUNCES setup 
screen and repeat steps 5, 6 and 7.

9.  If the three batch sizes are correct, press YES. This 

will advance to the % BYPASS function. Another 
alternative is to press and release either ON/OFF 
switch to exit the BREW OZ setup and return to 
the MAIN SCREEN.