Bunn CDS-3 Manual De Usuario

15

Auger Sections (3 req’d.)

Auger Nose

Short Auger Latch

Long Auger Latch

1.  Snap one of the auger sections 

to the long auger latch.

2.  Snap another auger section 

in place.

3.  Snap  the  third  auger 

section in place.

4.  Snap the auger nose onto the 

last section installed.

5.  With the long auger latch on 

top,  place  the  short  auger 

latch inside the augers and 

snap it onto the assembly.

1.  Firmly pull the auger section connections apart at each slot in the long auger latch.

2.  Firmly pull the connection between the auger section and auger nose apart.

3.  Separate the slots in the short auger latch as you remove the auger sections.

27646 022500

 

The augers may look intimidating at first glance. But there are really just a 

few pieces snapped together. Please familiarize yourself with this procedure. It’ll 

make cleaning and routine maintenance easier. The augers should be taken apart 

for cleaning and then reassembled for use.