Bunn 41343 Manual De Usuario

Page 14

 

This function activates a timer to provide a 

visual indication that the dispensed beverage has 

reached it's maximum hold time. All batch indicators 

on that side will flash when time expires.

NOTE: Flashing can be stopped by pressing any 

batch switch on the side activated, or by turning 

warmer off. 

1.  Press and hold upper right hidden switch until 

the display reads UNITS. Press and release upper 

right hidden switch until the display reads FRESH 

TIME.

2. Using (-) and (+), set the amount of time the 

warmers are to be on before activating the alert. 

3. Press DONE to store the programed time. The 

display should now read SET NEW RECIPE.

4.  Press and release the ON/OFF switch (either on 

DUAL brewers) located on the front switch panel 

to exit the FRESH TIME function and return to the 

FRESH TIME:  OFF

(-)      DONE      (+)

P3262

10. Using (-) and (+), set the percent of heat to be 

applied to the warmer. 

11. When finished, press the center program switch. 

The display should now read 

3rd ON TIME on 

SINGLE brewers, (<

 3rd ON TIME on DUAL 

brewers).

12. Using (-) and (+), set the amount of time the warm-

ers are to operate.

13. When finished, press the center program switch. 

The display should now read 

3rd ON POWER on 

SINGLE brewers, (<

 3rd ON POWER on DUAL 

brewers).

14. Using (-) and (+), set the percent of heat to be 

applied to the warmer.

15. When finished, press the center program switch. 

The display will read 

FRESH TIME on SINGLE 

brewers, (1st ON TIME 

> on DUAL brewers).

16. On DUAL brewers, repeat steps 4 thru 14 for right 

side warmer.

17. Press and release the ON/OFF switch (either on 

DUAL brewers) located on the front switch panel 

to exit the WARMER CONTROL function and return 

to the MAIN SCREEN.

41343 120710