Furuno FCR-28x9 Manual De Usuario
3. TARGET TRACKING (TT)
3-23
Tracking is achieved when the target is clearly distinguishable on the display for 5 out
of 10 consecutive scans, whether acquired automatically or manually.
of 10 consecutive scans, whether acquired automatically or manually.
Required tracking facilities are available within 0.1-32 nm on range scales including 3,
6, 12 nm, full plotting information is available within one scan when the range scale is
changed. Targets not detected in nine consecutive scans become "lost targets."
6, 12 nm, full plotting information is available within one scan when the range scale is
changed. Targets not detected in nine consecutive scans become "lost targets."
The true course and speed of own ship are computed from own ship's gyro and speed
inputs, and the resulting course and speed of each tracked target is easily computed
by vector summing of the relative motion with own ship's course and speed. The re-
sulting true or relative vector is displayed for each of the TTs. This process is updated
continually for each target on every scan of the radar.
inputs, and the resulting course and speed of each tracked target is easily computed
by vector summing of the relative motion with own ship's course and speed. The re-
sulting true or relative vector is displayed for each of the TTs. This process is updated
continually for each target on every scan of the radar.
The REF point for tracked target calculation can be the radar antenna position or the
CCRP. For CCRP, the displayed value includes the distance between the CCRP and
the antenna position. Therefore, when switching the REF point, the range, bearing,
CPA and TCPA of the tracked targets change.
CCRP. For CCRP, the displayed value includes the distance between the CCRP and
the antenna position. Therefore, when switching the REF point, the range, bearing,
CPA and TCPA of the tracked targets change.
Qualitative description of tracking error
The FURUNO TT's accuracy complies with or exceeds IMO standards.
Own ship maneuvers
For slow turns there is no effect. For very high turning rates (greater than 150°/minute,
depending on gyro), then all tracked targets revert to full accuracy.
depending on gyro), then all tracked targets revert to full accuracy.
Other ship maneuvers
Target ship courses; lag 15 to 30 seconds at high relative speed, or 3 to 6 seconds at
low (near 0) relative speed. It is less accurate during a turn due to lag, but accuracy
recovers quickly.
low (near 0) relative speed. It is less accurate during a turn due to lag, but accuracy
recovers quickly.
3.18
Factors Affecting Target Tracking
Sea returns
If the radar anti-clutter control is adjusted properly, there is no serious effect because
distant wave clutter, not eliminated by this control, is filtered out by more than one
bang correlation and scan-to-scan matching of data.
distant wave clutter, not eliminated by this control, is filtered out by more than one
bang correlation and scan-to-scan matching of data.
Rain and snow
Rain clutter can be acquired and tracked as targets. Adjust the rain clutter control to
suppress the clutter. If it is heavy rain, switch to S-band if provided, or switch on the
interference rejector on the radar. If heavy clutter still exists, switch to manual acqui-
sition. Accuracy can be affected.
suppress the clutter. If it is heavy rain, switch to S-band if provided, or switch on the
interference rejector on the radar. If heavy clutter still exists, switch to manual acqui-
sition. Accuracy can be affected.
Low clouds
Usually no affect. If necessary, adjust the rain clutter control.
Non-synchronous emissions
No effect.