Schneider Electric PM870 Manual De Usuario

© 2011 Schneider Electric. All Rights Reserved.

1. Perform steps 1 through 5 of the SETUP MODE 

Access procedure on page 11.

2. Press 

###:

 until METER is visible.

3. Press METER.
4. Press PT.
5. Enter the SCALE value: x1, x10, x100, NO PT 

(for direct connect).

6. Press OK.
7. Enter the PRIM (primary) value.
8. Press OK.
9. Enter the SEC. (secondary) value.
10. Press OK.
11. At the SETUP MODE screen, continue 

programming additional setup features or 
press

1;

 until you are asked to save changes.

12. Press YES to save the changes.

 

*

/

PL

SD11

0112

1. Perform steps 1 through 5 of the SETUP MODE 

Access procedure on page 11.

2. Press 

###:

 until METER is visible.

3. Press METER.
4. Press 

###:

 until HZ is visible.

5. Press HZ.
6. Select the frequency.
7. Press OK.
8. At the SETUP MODE screen, continue 

programming additional setup features or 
press

1;

 until you are asked to save changes.

9. Press YES to save the changes.

!0)#1(#$2

 

3

0 4

PLS

D

1101

09

1. Perform steps 1 through 5 of the SETUP MODE 

Access procedure on page 11.

2. Press 

###:

 until METER is visible.

3. Press METER.
4. Press 

###:

 until SYS is visible.

5. Press SYS.
6. Select your system (SYS) type (D) based on 

the number of wires (A), the number of CTs (B), 
and the number of voltage connections (either 
direct connect or with PT) (C).

7. Press OK.
8. At the SETUP MODE screen, continue 

programming additional setup features or 
press

1;

 until you are asked to save changes.

9. Press YES to save the changes.

5!

!

6

 

P

LS

D

1103

24