Hoshizaki DCM-751BAH-OS Manual De Usuario

18

1. Icemaker
• Icemaker water supply inlet is 1/2" female pipe thread (FPT). A minimum of 1/4" nominal

ID copper water tubing or equivalent is required for the icemaker water supply line.

• An icemaker water supply line shut-off valve and drain valve should be installed.
• Storage bin and drip tray drain outlets are 3/4" FPT. A minimum of 3/4" nominal ID hard

pipe or equivalent is required for the storage bin and drip tray drain lines.

Storage Bin 

Drain Outlet 

3/4" FPT

Drip Tray 

Drain Outlet 

3/4" FPT

Icemaker

Stand

Icemaker Water Supply 

Line Shut-Off Valve

Icemaker Water 

Supply Inlet

1/2" FPT

Icemaker Water Supply 

Line Drain Valve

Vent 

Tube

Minimum 1/4" Nominal ID

Copper Water Tubing 

Minimum 3/4" Nominal ID

Hard Pipe 

Separate piping to approved 

drain. Leave a 2-inch (5-cm) 

vertical air gap between the 

end of each pipe and the 

drain.

2-inch (5-cm) 

air gap

Floor Drain