GCC 12 Instruccion De Instalación

Most cables come with some kind of locking device to insure that the connection is made. Be
sure to use these locking devices, otherwise you may experience intermittent errors or the
printer will fail to operate altogether.

•

USB cables are keyed and can only be inserted one way.

•

There is no locking device on LocalTalk or RS-422 Serial connectors. Make sure the

connector is inserted all the way into the socket.

•

When you have inserted a Parallel port connector, lock the connector by lifting up

the wire clips at either end of the socket so that they fit into the slots on the sides of

the connector.

•

10 BaseT connectors have a locking tab similar to connectors on telephone cords.

When the plug is fully inserted the tab clicks into place.

•

10 Base2 connectors (Elite1212 only) have a rotating collar. Inserts the connector

onto the threaded socket, then rotate the collar clockwise to lock it.

Improperly inserted cables are the cause of many networking and printer-related problems.

USB connection ports can be found on nearly all new computers. USB technology allows
faster communication than traditional serial connections and is easily expandable through
interconnected hubs. All USB cables are the same. One end of the cable fits into the
computer or hub only and the other end fits into the printer only. You cannot connect the
cable incorrectly. 

S

TEP

8. C

ONNECT PRINTER CABLES