GCC 12 Instruccion De Instalación
15
15
B
I
-
DIRECTIONAL PARALLEL CONNECTION
The bi-directional parallel connection between the printer and a PC needs a standard
36-pin bi-directional cable (to IEEE 1284 standards). The length of this cable can be up to
2 meters or 6.5 feet.
36-pin bi-directional cable (to IEEE 1284 standards). The length of this cable can be up to
2 meters or 6.5 feet.
E
THERNET NETWORK CONNECTION (E
LITE
12/600N, E
LITE
12/1200N, E
LITE
12/600
AND
E
LITE
1212)
The Ethernet interface on your printer lets you connect to an Ethernet network via one of
two types of Ethernet cables: 10 BaseT, and 10 Base2 (Elite 1212 only).
two types of Ethernet cables: 10 BaseT, and 10 Base2 (Elite 1212 only).
10 B
ASE
T - U
NSHIELDED
T
WISTED
-P
AIR OR
UTP
Your printer connects to 10 BaseT Ethernet via the 10 BaseT (RJ-45) connector . The
cabling used is Unshielded Twisted-Pair (UTP).
cabling used is Unshielded Twisted-Pair (UTP).
10 B
ASE
2 - RG-58, T
HIN
C
OAX
,
OR
T
HINNET
(E
LITE
1212
ONLY
)
Your printer connects to 10 Base2 Ethernet via the 10 Base2 (BNC) connector. The
cabling used is called RG-58 or Thin Coax.
cabling used is called RG-58 or Thin Coax.