Allworx 9224 Guía Del Usuario
Phone Guide – 9224
i. Hold then Park
ii. Park then Hold
iii. Hold Calls Park Lines (Default)
s. Force Auto Answer – Allows the phone to automatically answer incoming calls.
i. Normal Operation: Incoming calls are not automatically answered (Default)
ii. Auto Answer: Phone will automatically answer call after one ring
t. Sidetone Disable –Normally only used when connecting a wireless headset to the phone.
i. Normal Operation (Default)
ii. Handset
Disabled
iii. Headset
Disabled
iv. Both
Disabled
u. Call Assistant CLID –Sets the call information displayed in Call Assistant and applications using the
Allworx TSP driver.
i. Calling Party Information (caller ID)
ii. DNIS
Information
4. After making changes to the preferences listed above, press the Select button
.
5. Press
the
EXIT soft key twice.
6. Select
the
YES soft key to save any changes OR select NO to cancel changes made.
7.4 Reboot the Phone
On occasion, rebooting the phone may be required. For example, when the Allworx server System
Administrator makes changes to the phone’s configuration, it must be rebooted.
Administrator makes changes to the phone’s configuration, it must be rebooted.
1. Select
the
CONFIG soft key.
2. Highlight
Reboot Phone.
3. Press
the
Select button
.
4. If you have any unsaved changes, you’ll be asked if you want to save them before rebooting. Select the
YES soft key to save any changes OR select NO to cancel changes made.
5. Select
the
YES soft key on the confirmation prompt to reboot.
7.5 Clear Call History
The phone retains the history of your calls up to 99 calls. You can clear your call history by using the following
steps:
steps:
1. Select
the
CONFIG soft key.
2. Scroll down and highlight Clear Call History.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Version 1. Revised: October 31, 2008
Page 21