Allworx 9224 Guía Del Usuario
Phone Guide – 9224
i. Edit Netmask IP – Option will appear if DHCP is disabled. Allows the manual entry of the
Netmask IP.
j. Edit Gateway IP – Option will appear if DHCP is disabled. Allows the manual entry of the
Gateway IP.
k. Phone VLAN Settings – Option will appear if VLAN is enabled.
i. Enter VLAN ID – 2 (Default)
ii. Enter VLAN Priority – 7 (Default)
l. PC VLAN Settings – Option will appear if VLAN is enabled.
i. Enter VLAN ID – 1 (Default)
ii. Enter VLAN Priority – 0 (Default)
4. Select
the
EXIT soft key.
5. Select
the
YES soft key to save any changes OR select NO to cancel changes made.
7.8 Current Status / Info
1. Select
the
CONFIG soft key.
2. Highlight
Current Status/Info.
3. Press
the
Select button
.
4. The following information is listed:
• DHCP Lease Time (if DHCP is enabled)
• SNTP Time Server IP
• Boot
• SNTP Time Server IP
• Boot
Server
IP
• Phone
IP
• Subnet
IP
• Gateway
IP
• Boot Configuration success or failure
• MAC
• MAC
Address
• Model
Name
• Software
Version
• LAN Connection Info
• PC Connection Info
• PC Connection Info
5. Use the Up / Down navigation arrows to move through the list.
6. When finished, press the EXIT soft key.
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2008 Allworx. All rights reserved
Version 1. Revised: October 31, 2008
Page 23