Citel 3000 Guía Del Usuario
EXTender 3000 System Administrator’s Guide (Definity)
Ethernet Management Console
Page 91
SHow Bridge Description
The lines in the LAN column provide the following information:
•
Received – The number of packets received from the LAN
•
Sent – The number of packets sent to the LAN
•
Discarded – The number of packets received from the LAN that were subsequently discarded.
They may have been destined for another system on the same LAN segment, have been broadcast
packets discarded because broadcast filtering was enabled, or they were discarded because there
was an error in the packet.
packets discarded because broadcast filtering was enabled, or they were discarded because there
was an error in the packet.
The lines in the WAN column represent the following:
•
Received – The number of packets received across the ISDN data connection
•
Sent – The number of packets sent across the ISDN data connection
•
Discarded – The number of packets received across the ISDN data connection that were subse-
quently discarded possibly due to an error in the packet.
The Stations on LAN line shows the number of systems (identified by distinct MAC addresses) that the
extender has detected on the LAN segment to which it is attached.
extender has detected on the LAN segment to which it is attached.
LOG ON – LOG OFF
The LOG ON command is used to enable, and the LOG OFF command used to disabled, the console log.
When the console log is enabled, a message is displayed when important events occur. Each message is pre-
ceded by a time stamp that indicates the time since the extender was powered on. This timestamp has the
format days:hours:minutes:seconds.
When the console log is enabled, a message is displayed when important events occur. Each message is pre-
ceded by a time stamp that indicates the time since the extender was powered on. This timestamp has the
format days:hours:minutes:seconds.
For example, if the console log is enabled 1 day, 15 hours, 3 minutes, and 30 seconds after the extender is
powered on, the following message would be displayed:
powered on, the following message would be displayed:
LOG ON
1:15:03:30 – Console Log Enabled
The following messages are displayed when the corresponding event occurs:
Table 16: Console Log Messages
Message
Event
Console log enabled
Console log is enabled.
Console log disabled
Console log is disabled.
Establishing PPP connection
Extender is unable to establish the ISDN data connection because
the channel is already in use, possibly by a call on the analog port or
by a simultaneous incoming PPP data call.
the channel is already in use, possibly by a call on the analog port or
by a simultaneous incoming PPP data call.
PPP call failed
The attempt to establish the ISDN data connection failed, possibly
due to the second B channel being incorrectly configured or not
being synchronized.
due to the second B channel being incorrectly configured or not
being synchronized.