3com 812 Manual De Usuario
B-2
A
PPENDIX
B: CLI C
OMMAND
D
ESCRIPTION
You must use add user to create a network type user for this command, and set
user to specify the protocol and other parameters related to bridging.
user to specify the protocol and other parameters related to bridging.
add dns host
<host_name> address
<ip_address>
Adds the named host to the Local Host Table. When the system needs to resolve
an address for an IP host name, the Local Host table is checked first, before a
request is sent to the remote DNS Name Server.
an address for an IP host name, the Local Host table is checked first, before a
request is sent to the remote DNS Name Server.
The add login_host command may also add to this table. See that command’s
description for details.
description for details.
add dns server
<domain_name>
primary_address [ip_address]
secondary_address [ip_address]
vc_name [vc_name]
Adds the IP address of a remote DNS Server for the specified Domain Name to the
Domain Name Server Table. The first specified server is sent the IP host name to be
resolved, first without, and then with the default domain name (see set dns for
more information about the default domain name). If that server cannot resolve
the name, it is sent to the next specified server. If PPP is being used for a wide area
connection, the vc_name parameter to specify a remote connection from which
the primary and secondary addresses will be learned.
Domain Name Server Table. The first specified server is sent the IP host name to be
resolved, first without, and then with the default domain name (see set dns for
more information about the default domain name). If that server cannot resolve
the name, it is sent to the next specified server. If PPP is being used for a wide area
connection, the vc_name parameter to specify a remote connection from which
the primary and secondary addresses will be learned.
add filter
<filter_name>
Adds a filter file name to the filter table. The filter table is a managed list of filter
names used by SNMP. A filter file is a text file stored in the FLASH file system, that
you load using TFTP. Add filter also verifies the syntax of the filter file.
names used by SNMP. A filter file is a text file stored in the FLASH file system, that
you load using TFTP. Add filter also verifies the syntax of the filter file.
If syntax verification fails, you’ll receive an error message, and the filter will still be
added to the table, but is not usable.
added to the table, but is not usable.
Parameter
Description
<network_name>
Designation you wish to give to this bridge network.
enabled
Default is to enable the bridge network.
Parameter
Description
<host_name>
Designation of the local host.
<ip_address>
IP address of a named host in nnn.nnn.nnn.nnn format.
Parameter
Description
<domain_name>
Domain name. Use * for all domains.
Status
The status concerning the DNS server.
primary_address
The primary IP address of the DNS server.
secondary_address
The secondary IP address of the DNS server.
vc_name
The VC profile to use for obtaining the DNS addresses