3com 812 Manual De Usuario
CLI Commands
B-3
You must correct the filter file in a text editor, use TFTP to export the updated file
to the system’s FLASH file system, and use the verify filter command to check the
filter’s syntax.
to the system’s FLASH file system, and use the verify filter command to check the
filter’s syntax.
add framed_route vc
<name>
ip_route [ip_address]
metric [number]
Adds a framed (static) network to the VC profile for WAN connections. This
method of creating a static route does not run RIP to learn routes, so you must
specify IP route and gateway addresses. See add ip route.
method of creating a static route does not run RIP to learn routes, so you must
specify IP route and gateway addresses. See add ip route.
add framed_route
tunnel <tunnel_name>
ip_route [ip_address]
metric [number]
Adds a framed (static) network to the VC profile for WAN connections. This
method of creating a static route does not run RIP to learn routes, so you must
specify IP route and gateway addresses. See add ip route.
method of creating a static route does not run RIP to learn routes, so you must
specify IP route and gateway addresses. See add ip route.
Before adding a framed route for a VPN tunnel, ensure that the tunnel is disabled.
Once the tunnel has been disabled, you can then add the framed route using the
add framed_route command.
Once the tunnel has been disabled, you can then add the framed route using the
add framed_route command.
add ip defaultroute
gateway <ip_address>
{ metric [1] }
Defines a default gateway IP router, which acts as the default route for IP packets
destined for remote hosts.
destined for remote hosts.
Parameter
Description
<filter_name>
Designation of a filter file, up to twenty ASCII characters.
Parameter
Description
<VC profile name>
VC profile name specified for the framed network. This is limited to 32
characters.
characters.
ip_route
IP address of the remote network
metric
Integer representing how far away the route is, in “hops” from other
routers. Values are 1 through 15.
routers. Values are 1 through 15.
Parameter
Description
<VC profile name>
VC profile name specified for the framed network. This is limited to 32
characters.
characters.
ip_route
IP address of the remote network
metric
Integer representing how far away the route is, in “hops” from other
routers. Values are 1 through 15.
routers. Values are 1 through 15.
Parameter
Description
<IP_address >
IP address of the gateway router.
metric
Integer representing how far away the default router is, in “hops” through
other routers. Values: 1-15.
other routers. Values: 1-15.