3com 5500-ei pwr Instruccion De Instalación
1-4
Mirroring Configuration
Complete the following tasks to configure mirroring:
Task
Remarks
Optional
Optional
On a Switch 5500-EI, only one destination port for local port mirroring and only one
reflector port can be configured, and the two types of ports cannot both exist.
Configuring Local Port Mirroring
Configuration prerequisites
z
The source port is determined and the direction in which the packets are to be mirrored
is determined.
z
The destination port is determined.
Configuration procedure
Follow these steps to configure port mirroring on Switch 5500-EI series:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a port mirroring
group
group
mirroring-group group-id
local
local
Required
In system
view
view
mirroring-group group-id
mirroring-port
mirroring-port-list { both |
inbound | outbound }
mirroring-port
mirroring-port-list { both |
inbound | outbound }
interface interface-type
interface-number
interface-number
mirroring-group group-id
mirroring-port { both |
inbound | outbound }
mirroring-port { both |
inbound | outbound }
Configure
the source
port for the
port
mirroring
group
the source
port for the
port
mirroring
group
In port
view
view
quit
Use either approach
You can configure multiple
source ports at a time in
system view, or you can
configure the source port in
specific port view. The
configurations in the two
views have the same effect.
source ports at a time in
system view, or you can
configure the source port in
specific port view. The
configurations in the two
views have the same effect.
In system
view
view
mirroring-group group-id
monitor-port
monitor-port-id
monitor-port
monitor-port-id
Configure
the
destination
port for the
port
mirroring
the
destination
port for the
port
mirroring
In port
view
view
interface interface-type
interface-number
interface-number
Use either approach
The configurations in the
two views have the same
effect.
two views have the same
effect.