3com 7000 Manual Suplementario
Port Interface Type
121
This action will change the external clock source
port.
Are you sure (Y/N)?
Enter:
y
This message is displayed:
Setting clock synchronization completed
successfully.
The external clock source port is <3.1>
The synched external clock ports are:
<3.2>
<3.3>
<3.4>
<4.1>
<4.2>
<4.3>
<4.4>
<5.1>
<5.2>
<5.3>
<5.4>
<6.1>
<6.2>
<6.3>
<6.4>
Port Interface Type
The following commands allow you to configure the port interface type.
■
■
See Chapter 2 for more information about port interface types.
Display Port Interface
Type
Displays the ATM interface type for each port of the CoreBuilder 7000
family ATM switch. The interface type is either the User-Network Interface
(UNI), or one of the Network-Network interfaces, E-IISP, IISP or PNNI.
When the port is connected to another CoreBuilder 7000 family ATM
switch the interface is E-IISP or PNNI. If it connected to an edge device
family ATM switch. The interface type is either the User-Network Interface
(UNI), or one of the Network-Network interfaces, E-IISP, IISP or PNNI.
When the port is connected to another CoreBuilder 7000 family ATM
switch the interface is E-IISP or PNNI. If it connected to an edge device