3com 7000 Manual Suplementario
Port Interface Type
123
Update Port Interface
Type
Updates the ATM interface type for a specified port of the CoreBuilder
7000 family ATM switch. The possible interface types are PNNI, E-IISP, UNI
and IISP.
7000 family ATM switch. The possible interface types are PNNI, E-IISP, UNI
and IISP.
PNNI is available in version 4.5 extended only.
Manual Discovery
The main use of this command is during manual discovery, that is, when
auto-discovery is disabled. When auto-discovery is enabled,
(“Enable/Disable Auto-Discovery” on page 133) the ATM interface type is
determined automatically by the auto-discovery protocol with the peer
ATM device. For more information about manual discovery, “Manual Discovery” on page 47 in the Operations Guide.
auto-discovery is disabled. When auto-discovery is enabled,
(“Enable/Disable Auto-Discovery” on page 133) the ATM interface type is
determined automatically by the auto-discovery protocol with the peer
ATM device. For more information about manual discovery, “Manual Discovery” on page 47 in the Operations Guide.
Interface type:
---------------
Port id: <3.1> <3.2> <3.3> <3.4> <3.5> <3.6> <3.7> <3.8>
Current val: NNI NNI UNI UNI E-IISP E-IISP UNI UNI
Next reb val: NNI NNI UNI UNI E-IISP UNI UNI UNI
Port id: <4.1> <4.2> <4.3> <4.4> <4.5> <4.6> <4.7> <4.8>
Current val: UNI UNI UNI PNNI UNI UNI UNI UNI
Next reb val: UNI UNI UNI UNI UNI UNI PNNI UNI
Port id: <5.1> <5.2> <5.3> <5.4> <5.5> <5.6> <5.7> <5.8>
Current val: UNI UNI PNNI UNI UNI UNI UNI UNI
Next reb val: UNI UNI PNNI UNI UNI UNI UNI UNI
Port id: <6.1> <6.2> <6.3> <6.4> <6.5> <6.6> <6.7> <6.8>
Current val: UNI PNNI UNI UNI UNI UNI UNI UNI
Next reb val: UNI UNI UNI UNI UNI UNI UNI UNI