3com 7000 Manual Suplementario
264
C
HAPTER
9: M
ANAGING
LAN E
MULATION
S
ERVICES
Enable/Disable LE
Servers Redundancy
Enables or disables the LECS-based LANE redundancy facility in the
CoreBuilder 7000 family ATM switch. When it is disabled, you can use the
NMS-based LANE redundancy facility provided with previous software
versions. For more information, see “Redundant LANE Services” on page 154 in the Operations Guide.
CoreBuilder 7000 family ATM switch. When it is disabled, you can use the
NMS-based LANE redundancy facility provided with previous software
versions. For more information, see “Redundant LANE Services” on page 154 in the Operations Guide.
Command Actions
Command Result
Example
Enter:
1 1 5 4 2 0
The following message is displayed:
Redundancy mode changed
The LECS-based LANE redundancy facility in the CoreBuilder 7000 family
ATM switch is disabled
ATM switch is disabled
.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(2) LRM: Change LES redundancy Mode
Enter a parameter at the prompt
Parameter
Format or Range
Disable
Enable
Enable
0
1
1
Direct access sequence:
1 1 5 4 2
[parameters]
System action taken:
The LECS-based LANE redundancy facility in the
CoreBuilder 7000 family ATM switch is enabled or
disabled.
CoreBuilder 7000 family ATM switch is enabled or
disabled.
System message display:
Redundancy moode changed