3com 7000 Manual Suplementario
LAN Emulation Redundancy Setup
263
Display LE Service
Redundancy
Displays parameters of the LES redundancy facility in the CoreBuilder
7000 family ATM switch. For more information, see “LAN Emulation Redundancy” on page 153 in the Operations Guide.
7000 family ATM switch. For more information, see “LAN Emulation Redundancy” on page 153 in the Operations Guide.
Command Actions
Command Result
Example
Enter:
1 1 5 4 1
The following information is displayed:
Table 38 shows the LES Redundancy Parameters displayed by the
command.
command.
.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(1) DLR: Show LES redundancy params
Direct access sequence:
1 1 5 4 1
System action taken:
The LES redundancy parameters are displayed.
System message display:
Information is displayed as shown in the example
below.
below.
LANE Service redundancy mechanism : Enabled
Startup Delay (Sec) : 600
Table 38 LES Redundancy Parameters
Name
Description
LANE Service Redundancy Status
Enable/disable status
Startup Delay
Time elapsed between switch startup and
startup of LANE redundancy facility — in
seconds. Default is 600.
startup of LANE redundancy facility — in
seconds. Default is 600.