3com 7000 Manual Suplementario
LAN Emulation Redundancy Setup
265
Update Startup Delay
Updates the startup delay parameter for LANE redundancy facility in the
CoreBuilder 7000 family ATM switch. The startup delay is the time
elapsed between the switch startup and the startup of the LANE
redundancy facility.
CoreBuilder 7000 family ATM switch. The startup delay is the time
elapsed between the switch startup and the startup of the LANE
redundancy facility.
To display the current value of the parameter, “Display LE Service
Redundancy” on page 263. This parameter is in the range 1–15 minutes
and defaults to 10 minutes. For more information about the startup
delay, see “LANE Redundancy Start-up Delay” on page 160 in the Operations Guide.
Redundancy” on page 263. This parameter is in the range 1–15 minutes
and defaults to 10 minutes. For more information about the startup
delay, see “LANE Redundancy Start-up Delay” on page 160 in the Operations Guide.
The startup delay takes effect at the next reboot.
Command Actions
Command Result
Example
Enter:
1 1 5 4 3 600
The following message is displayed:
Startup delay changed.
The startup delay for the LANE redundancy facility in the CoreBuilder
7000 family ATM switch is set to 600 seconds
7000 family ATM switch is set to 600 seconds
.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(5) SLE: LE setup
(4) RDN: LE Service redundancy setup
(3) LRD: Set LES red. startup delay
Enter a parameter at the prompt
Parameter
Format or Range
Startup Delay
Seconds
Default is 600 seconds.
Default is 600 seconds.
Direct access sequence:
1 1 5 4 3
[parameters]
System action taken:
The startup delay for the LANE redundancy facility is
set for the next reboot.
set for the next reboot.
System message display:
Startup delay changed.