3com 7000 Manual Suplementario
Setting Optimization Metrics
419
Set Optimization for
NonRealTime-VBR
Sets the Non Real Time Variable Bit Rate (VBR) optimization parameter. A
change to the NrtVBR optimization parameter takes place immediately.
change to the NrtVBR optimization parameter takes place immediately.
Command Actions
Command Result
Example
Enter:
1 1 10 4 3 5 2 3 2
The following message is displayed:
Default Value is ‘3 - opt_ctd’, New value is ‘2 - opt_av_cr’
Press ENTER to continue...
The value of the NonRealTime-VBR optimization parameter is updated to
2.
2.
Enter menu sequence:
(1) SYS: Platform config
(1) SET: Switch setup
(10) PNI: PNNI Setup
(4) CFP: Configure PNNI
(3) NCF: Node Configuration
(5) OPT: Optimization Metrics
(2) SOP: Set Optimization
Metrics
(3) ONV: Optimization for
NonRealTime-VBR
Enter a parameter at the prompt
Parameter
Format or Range
constant bit rate
0 - 6
Direct access sequence:
1 1 10 4 3 5 2 3
[parameters]
System action taken:
The non real time VBR optimization parameter is
displayed and is updated to its new value.
displayed and is updated to its new value.
System message display:
Default value is <x>. New value is
<y>.