3com S7906E Guía De Referencia

 

1-19 

packet-timeout: Timeout time for waiting for responses in a UDP-jitter test, in the range 10 to 3600000 

milliseconds. 

Use the probe packet-timeout command to configure the timeout time for waiting for responses in a 

UDP-jitter test. 

Use the undo probe packet-timeout command to restore the default. 

By default, the timeout time in a UDP-jitter test is 3000 milliseconds. 

# Configure the timeout time for waiting for responses in a UDP-jitter test as 100 milliseconds. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type udp-jitter 

[Syaname-nqa-admin-test-udp-jitter] probe packet-timeout 100 

probe timeout timeout 

undo probe timeout 

DHCP, DLSw, FTP, HTTP, ICMP-echo, SNMP, TCP, UDP-echo test type view 

2: System level 

timeout: Timeout time in a probe except UDP-jitter probe, in milliseconds. For an FTP or HTTP probe, 

the value range is 10 to 86400000; for a DHCP, DLSw, ICMP-echo, SNMP, TCP or UDP-echo probe, 

the value range is 10 to 3600000. 

Use the probe timeout command to configure the timeout time in a probe. 

Use the undo probe timeout command to restore the default. 

By default, the timeout time is 3000 milliseconds. 

After an NQA probe begins, if the NQA probe is not finished within the time specified in the probe 

timeout command, then the probe times out. 

# Configure the timeout time in a DHCP probe as 10000 milliseconds. 

<Sysname> system-view 

[Sysname] nqa entry admin test