3com S7906E Guía De Referencia

 

1-21 

[Sysname-nqa-admin-test-tcp] reaction 1 checked-element probe-fail threshold-type 

consecutive 3 action-type trigger-only 

reaction trap {  probe-failure  consecutive-probe-failures | test-complete | test-failure 

cumulate-probe-failures } 

undo reaction trap { probe-failure | test-complete | test-failure } 

Any NQA test type view 

2: System level 

probe-failure  consecutive-probe-failures: Specifies to send a trap indicating a probe failure to the 

network management server after consecutive probe failures in an NQA test. 

consecutive-probe-failures is the number of consecutive probe failures in a test, in the range 1 to 15. 

test-complete: Specifies to send a trap to indicate that the test is completed. 

test-failure cumulate-probe-failures: Specifies to send a trap indicating a probe failure to the network 

management server if the total number of probe failures in an NQA test is larger than or equal to 

cumulate-probe-failures. For one test, the trap is sent only when the test is completed. 

cumulate-probe-failures is the total number of consecutive probe failures in a test, in the range 1 to 15. 

Use the reaction trap command to configure to send traps to network management server under 

specified conditions. 

Use the undo reaction trap command to restore the default. 

By default, no traps are sent to the network management server. 

# Configure to send a trap indicating a probe failure after five consecutive probe failures in an 

ICMP-echo test. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type icmp-echo 

[Sysname-nqa-admin-test-icmp-echo] reaction trap probe-failure 5 

route-option bypass-route 

undo route-option bypass-route