3com S7906E Guía De Referencia
1-20
Table 1-10 display cfd mp command output description
Field
Description
Interface GigabitEthernet2/0/2 VLAN 100
MP configuration of the specified VLAN on the
specified port
specified port
MEP ID
ID of the MEP
MIP
A MIP in the MP
Level
MD level that an MP belongs to
Service instance
Service instance to which the MP belongs
Direction
Direction of the MP
Maintenance domain
MD to which an MP belongs
Maintenance association
MA to which an MP belongs
display cfd remote-mep
Syntax
display cfd remote-mep service-instance instance-id mep mep-id
View
Any view
Default level
2: System level
Parameters
service-instance instance-id: Specifies the service instance ID, ranging from 1 to 32767.
mep mep-id: Specifies the ID of a MEP, ranging from 1 to 8191.
Description
Use the display cfd remote-mep command to display the information of the remote MEP.
Examples
# Display the information of the remote MEP.
<Sysname> display cfd remote-mep service-instance 4 mep 10
MEP ID MAC Address State Time MAC Status
20 00E0-FC00-6565 OK 2006/03/06 02:36:38 UP
30 00E0-FC27-6502 OK 2006/03/06 02:36:38 DOWN
40 00E0-FC00-6510 FAILED 2006/03/06 02:36:39 DOWN
50 00E0-FC52-BAA0 OK 2006/03/06 02:36:44 DOWN
60 0010-FC00-6502 OK 2006/03/06 02:36:42 DOWN