3com S7906E Guía De Referencia
1-4
Description
Use the display rrpp ring-group command to display the ring group configuration. If no ring group ID is
specified, the configuration of all ring groups is displayed. For an edge node ring group, the subring
sending Edge-Hello packets is also displayed.
Related commands: domain ring.
Examples
# Display the ring group configuration.
<Sysname> display rrpp ring-group
Ring Group 1:
domain 1 ring 1 to 3, 5
domain 2 ring 1 to 3, 5
domain 1 ring 1 send Edge-Hello packet
Ring Group 2:
domain 1 ring 4, 6 to 7
domain 2 ring 4, 6 to 7
Table 1-2 display rrpp ring-group command output description
Field
Description
Ring Group xx
RRPP ring group ID
domain xx ring xx
Subrings in the ring group
domain xx ring xx send
Edge-Hello packet
Edge-Hello packet
The subring sending Edge-Hello packets in the ring group
display rrpp statistics
Syntax
display rrpp statistics domain domain-id [ ring ring-id ]
View
Any view
Default Level
1: Monitor level
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
ring-id: RRPP ring ID, in the range 1 to 64.
Description
Use the display rrpp statistics command to display RRPP message statistics.
Note that: