3com S7906E Guía De Instalación Rápida
1-26
Figure 1-19 Front panel of the LSQ1SRP2XB0
(1) CF card slot and CFS LED
(2) 10GBase-R-XFP Ethernet ports and LEDs
(3) Console port
(4) 10/100Base-TX Ethernet port for management and LEDs
(5) Power and fan tray status LEDs
(4) 10/100Base-TX Ethernet port for management and LEDs
(5) Power and fan tray status LEDs
(6) LPU status LEDs
(7) ACTIVE LED of LSQ1SRP2XB0
(8) RESET button
On-board interfaces
z
CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you can store host
software and logs, and thus upgrade software conveniently. The CF card is hot swappable.
describes the CFS LED on the right of the CF card.
Table 1-34 Description of the CFS LED
Status
Description
OFF
No CF card is in position.
ON
The CF card is in position.
z
10GBase-R-XFP Ethernet ports
Table 1-35 Specifications of the 10GBase-R-XFP Ethernet ports
Item
Specifications
Connector type
LC
Number of interfaces
2
Interface standard
10GBase-R
Applicable fiber module
Refer to “Appendix A List of Pluggable Modules.”
describes the status LEDs of 10GBase-R-XFP Ethernet ports.
Table 1-36 Description of the status LEDs of 10GBase-R-XFP Ethernet ports
LED
Description
LINK
z
OFF: No link is present.
z
ON: A link is present.
ACT
z
OFF: No data is being transmitted or received.
z
Blinking: Data is being transmitted or received.
z
Console port
Using an RJ-45 connector, the console port can be connected through a regular asynchronous serial
cable directly to a computer for system debugging, configuration, maintenance, management, and host