3com 3031 Instruccion De Instalación

C

HAPTER

 68: C

ONGESTION

 M

ANAGEMENT

Perform the following in the Class View.

Defining/Deleting ip precedence match rule 

Perform the following in the Class View.

Use the corresponding command to configure the value of 

 during 

the configuration, otherwise, the configuration of the 

 

command will overwrite the previous configurations.

Perform the following in the Class View.

Because the RTP priority queue has the higher priority than that of the CBQ, the 
RTP will take effect only if both the RTP priority queue and the queue based on the 
class matching RTP are configured at the same time.

Perform the following in the Class View.

: Only the IP protocol is used.

To define a traffic behavior, you should first create a traffic behavior name and 
then configure attributes for it in the new traffic behavior view.

Table 1031   Defining/Deleting DSCP match rule

Define DSCP match rule

Delete DSCP match rule

Table 1032   Defining/Deleting ip precedence match rule

Define ip precedence match rule

Delete ip precedence match rule

Table 1033   Defining/Deleting RTP port match rule

Define RTP port match rule

starting-port-number end-port 

Delete RTP port match rule 

Table 1034   Defining/Deleting protocol match rule

Define protocol match rule

Delete protocol match rule