3com 3031 Instruccion De Instalación

Perform the following configuration in system view.

: Name of the traffic behavior. It is not the name of the traffic 

behavior pre-defined by the system.

Perform the following in Traffic Behavior View.

This command can only be applied in output direction of the interface and ATM 
PVC

The same traffic behavior must use the same standard to configure 

 and 

, either bandwidth or percentage.

Perform the following in Traffic Behavior View.

In traffic behavior view, this command cannot be used along with 

 and 

.

This command cannot be used for default-class. 

The same traffic behavior must use the same standard to configure 

 and 

 either bandwidth or percentage.

Perform the following in Traffic Behavior View.

Configure that the traffic behavior of the feature can only be associated with the 
default class.

Table 1035   Defining a traffic behavior and enter traffic behavior view.

Define a traffic behavior and enter 
traffic behavior view.

Delete a traffic behavior

Table 1036   Configuring AF and minimum available bandwidth

Configure AF and minimum 
available bandwidth

queue af bandwidth { bandwidth | pct 

Delete the configuration

Table 1037   Configuring ef and maximum bandwidth

Configure ef and maximum 
bandwidth

 bandwidth [ cbs 

burst ] | pct percentage }

Delete the configuration

Table 1038   Configuring fair queuing

Configure fair queuing

queue wfq [ queue-number total-queue-number ]

Delete the configuration